List of project standards
From the ABNT catalog, it can build the list of parts that apply to your project, with the edition and status of each, for the team to check.
Deliverable: list of standards with edition, status and linkOcto and the standards
The standard says what to deliver. Octo helps organize the delivery.
The ISO 19650 series covers information management using BIM, and ABNT publishes its parts in Brazil. ABNT NBR 15575 covers the performance of residential buildings. The standards are paid, and their text is not reproduced here: this page shows what each part covers, its catalog status and where Octo can help your team meet what it has already defined.
ISO 196506 partsfrom concepts to health and safety
ABNT NBR ISO 19650-12022Corrected Version 2:2025, in force
ABNT NBR 155756 partsPart 1 dates from 2025, in force
Sources10listed at the end of the page
01
What Octo does with the standards.
Four possible deliverables. Octo organizes; interpreting the standard is up to the professional of record.
Information registers and versions
Part 1 of ISO 19650 recommends an information management structure: exchange, recording, versioning and organization. Octo can automate the registers and versioning your team has already defined.
Deliverable: register routine that follows your procedureChecklists by system
With the NBR 15575 text your company owns, it can organize checklists by system (structure, floors, walls, roofs, plumbing) for the team to fill in.
Deliverable: checklists to fill in and reviewNew edition alert
It can check the ABNT catalog from time to time and flag when a part used in the project changes edition or status.
Deliverable: alert with the catalog link
02
Eight arms, one standard at a time.
The same Octo cycle, applied to this workstream. Each arm has a narrow role; the people who approve and sign are on your team.
-
Discovery
Surveys what already exists
Procedures, document templates and the standards the company already owns. Octo starts from what your team has defined.
-
Data
Pins down edition and status
For each standard, the edition, the date and the status in the ABNT catalog, with the link.
-
Security
Respects the license
A purchased standard is for the company's use. Octo does not reproduce the text outside the client's environment.
-
Architecture
Picks the format
Spreadsheet, checklist or routine in the system the team already uses.
-
Development
Builds the routine
Lists, registers and alerts, with the reference for each item.
-
Review
Checks with the professional of record
Each list goes through the professional of record before it is used.
-
Release
Delivers with your OK
Puts the lists and routines in the environment the team specifies.
-
Documentation
Records the decisions
Which part applies to each project, in which edition, and why.
Octo does not certify compliance with standards. Interpretation and technical responsibility belong to the licensed professionals.
03
Each part, its own status.
Edition and status per the ISO committee catalog and the ABNT catalog, accessed on October 28, 2026.
| Standard | What it covers | Status |
|---|---|---|
| ISO 19650-1:2018 | Concepts and principles | ABNT NBR ISO 19650-1:2022, Corrected Version 2:2025, in force |
| ISO 19650-2:2018 | Delivery phase of the assets | ABNT NBR ISO 19650-2:2022, Corrected Version 2:2025, in force |
| ISO 19650-3:2020 | Operational phase of the assets | ABNT NBR ISO 19650-3:2025, published October 7, 2025, in force |
| ISO 19650-4:2022 | Information exchange | 2025 Brazilian edition in the ABNT catalog |
| ISO 19650-5:2020 | Security | 2025 Brazilian edition in the ABNT catalog |
| ISO 19650-6:2025 | Health and safety | 2026 Brazilian edition in the ABNT catalog |
| ABNT NBR 15575-1:2025 | General requirements | Published December 5, 2025, in force |
| ABNT NBR 15575-2:2013 | Structural systems | In force |
| ABNT NBR 15575-3 | Floor systems | In force |
| ABNT NBR 15575-4:2025 | Internal and external vertical enclosures (SVVIE) | In force |
| ABNT NBR 15575-5:2025 | Roof systems | In force |
| ABNT NBR 15575-6:2021 | Plumbing and drainage systems | In force |
04
From request to routine.
Three steps. Each one only makes sense after the previous one has shown results on your team.
A proposal, not a promise
List of project standards
You name the project and Octo builds the list with edition and status.
- Parts of ISO 19650 and NBR 15575 that apply
- Edition and status, with the catalog link
Checklists
Starting from the text the company owns, the checklists become the same on every project.
- One checklist per system
- Filled in by the team, reviewed by the professional of record
Ongoing records
Information registers and versions follow the company's procedure, with an alert when an edition changes.
- Registers and versions per the procedure
- Alert when a standard changes edition
05
Confirmed by sources.
Every point below has a source published by the vendor, the project or the responsible agency. The sources are in the next section.
5
points with a published source, each with its reference alongside.
- ConfirmedISO 19650 series
- The series, from committee ISO/TC 59/SC 13, has six parts: concepts and principles (2018), delivery phase of the assets (2018), operational phase (2020), information exchange (2022), security (2020) and health and safety (2025).Source: ISO/TC 59/SC 13 catalog
- ConfirmedPart 1 in Brazil
- ABNT NBR ISO 19650-1:2022 (Corrected Version 2:2025) is in force, from committee ABNT/CEE-134, Building Information Modeling. It gives recommendations for an information management framework: exchange, recording, versioning and organization.Source: ABNT catalog
- ConfirmedPart 2 in Brazil
- ABNT NBR ISO 19650-2:2022 (Corrected Version 2:2025), in force, sets the requirements for information management in the delivery phase of assets.Source: ABNT catalog
- ConfirmedPart 3 in Brazil
- ABNT NBR ISO 19650-3:2025, for the operational phase of assets, was published on October 7, 2025 and is in force. The catalog also lists parts 4:2025, 5:2025 and 6:2026.Source: ABNT catalog
- ConfirmedNBR 15575
- ABNT NBR 15575-1:2025, published on December 5, 2025 and in force, from committee ABNT/CB-002, sets the performance requirements and criteria for residential buildings. Parts 2 to 6 cover structural systems, floors, vertical enclosures, roofs and plumbing systems.Source: ABNT catalog
06
What Octo does and what stays with you.
Octo prepares everything, but does not sign. The document of record stays with whoever is accountable for it.
Octo prepares
Surveys, calculates, organizes and produces the documents: spreadsheets, reports, drawing sheets and drafts.
Deliverable: material ready to checkYour team checks
The licensed professional checks what Octo delivered before signing. If something doesn't add up, it goes back to Octo with the correction.
Step: review by the signerWho signs
Octo does not sign. Designs, technical reports, ART/RRT (Brazil's professional responsibility records), accountability reports and any official document are still signed by the company's or agency's licensed professional: here, the responsible engineer or architect, with an ART or RRT.
Sign-off: engineer or architect, with ART/RRT
07
Sources.
ISO committee catalog and ABNT catalog. Accessed on October 28, 2026.
- ISO/TC 59/SC 13: catalogParts 1 to 6 of ISO 19650
- ABNT NBR ISO 19650-1:2022Concepts and principles
- ABNT NBR ISO 19650-2:2022Delivery phase of the assets
- ABNT NBR ISO 19650-3:2025Operational phase of the assets
- ABNT NBR 15575-1:2025General requirements
- ABNT NBR 15575-2:2013Structural systems
- ABNT NBR 15575-3Floor systems
- ABNT NBR 15575-4:2025Internal and external vertical enclosures
- ABNT NBR 15575-5:2025Roof systems
- ABNT NBR 15575-6:2021Plumbing and drainage systems
Which edition is your team using?
The assessment starts with the procedures and standards your company already has, without changing anything. You get a proposal for what can be organized and decide with it in hand.